Paris Filmstrip Projects

Darkroom Door - Sunday, February 17, 2019

Hello stampers, it’s Robyn Wood with you today sharing some projects using the new Paris Filmstrip stamp. It is wonderful to see Filmstrip images return to the Darkroom Door product range, the card strips were always among my favourites and I love seeing them in stamps. Let me show you some ideas for using the Paris Filmstrip:



The Paris Filmstrip makes for a striking card if stamped simply in black and left uncoloured.

Instructions:
1. Stamp Paris Filmstrip onto white card using black Archival ink. Trim closely around the whole stamp, leaving images intact.
2. Stamp a panel of red cardstock all over with the French script from the Tour Eiffel stamp set using black Archival ink.
3. Add a line of faux stitching around the edge of the red panel using a fine, black pen.
4.  Layer the right side of the panel with a small doyley and tie with ribbon.
5. Attach Paris Filmstrip image over the doyley/ribbon – arrange at slight angle. Trim off the parts of the image which overhang the red card. Attach to white card base.
6. Stamp Je t’aime from the same set onto white card using black Archival ink. Trim closely and layer with red card. Attach to card using foam tape and embellish with small, white pearls.

Supplies used:
Darkroom Door Paris Filmstrip Stamp
Darkroom Door Tour Eiffel Stamp Set
Archival ink: Jet Black


Don’t forget that the Paris Filmstrip images are awesome to use on their own, trimmed of the filmstrip framing and this card is one idea for you to try.

Instructions:
1. Stamp a panel of kraft cardstock randomly with the French Texture stamp using Pumice Stone Distress Ink. Sponge edges with Walnut Stain Distress Ink. 
2. Stamp Paris Filmstrip onto white card using black Archival ink and cut images apart. 
3. Give stamped images some colour by sponging with Distress Inks and layer with black cardstock.
4. Colour a small piece of cheesecloth using Distress Inks then attach to bottom section of kraft panel.
5. Add a strip of torn black cardstock over the cheesecloth then arrange layered images in a group. Tie a length of black ribbon across the kraft panel so it sits just over the bottoms of the images. Attach panel to black card base.
6. Stamp Happy Birthday greeting onto white card using black Archival ink and trim closely. Layer with black cardstock and add to cardfront to finish.

Supplies used:
Darkroom Door Paris Filmstrip Stamp
Darkroom Door Tour Eiffel Stamp Set
Darkroom Door Happy Birthday Stamp Set
Distress Ink: Pumice Stone, Walnut Stain


Decorated tags make great embellishments for journal pages & handy to add to a travel diary. The Paris Filmstrip image easily cuts apart giving you little postcard type images that hit the high points of a visit to Paris.

Instructions:
1. Add some colour to a manilla tag using Distress Oxide inks.  Start by smooshing some inks onto a non-stick craft mat, spritz with a little water and drag the tag through the ink until you are happy with the effect. 
2. Stencil parts of the tag using the Diamonds stencil and white gesso.
3. Stamp the tag with the Paris definition and lights from the Tour Eiffel stamp set using black Archival ink.
4. Stamp the small Eiffel Tower and street sign from the same set onto cardstock using black Archival ink. 
5. Stamp Paris Filmstrip onto white card using black Archival ink and cut images apart.
6. Give stamped images some colour by sponging with Distress Inks. Distress edges lightly and sponge with brown Distress ink.
7. Layered stamped images onto tag, set the Filmstrips images at slight angles for interest.
8. Add a round paperclip over the Paris definition. Add some ribbon to the top of the tag and attach street sign using a Tim Holtz Trinket Pin.

Supplies used:
Darkroom Door Paris Filmstrip Stamp
Darkroom Door Tour Eiffel Stamp Set
Darkroom Door Large Stencil: Diamonds
Dina Wakley Gesso - white
Distress Oxide ink: Frayed Burlap, Chipped Sapphire, Weathered Wood
Distress Ink: Walnut Stain, Old Paper, Squeezed Lemonade, Tumbled Glass

I hope you have enjoyed learning how these projects came together!

Until next time, 
Robyn

Bottles Stamp Set Ideas

Darkroom Door - Wednesday, February 13, 2019

Hello Stampers, it is Godelieve Tijskens today, sharing some ideas with the fabulous new Bottles stamp set.

First I have created an art journal page with the complete set: 



Before I cut a set of new rubber stamps, I like to stamp the whole sheet a few times.


A sheet fits perfectly on a page in one of my journals.  I stamped the bottles with Versamark ink and heat embossed  with white embossing powder.

Next I used stamps from the Grunge Marks and Wings set to stamp and heat emboss onto the bottles. 


Using an ink blending tool and Dylusions paints I colored the pages.  I used a paper towel to remove the paint from the embossed parts immediately, to keep the embossing white.

Garden Patina Archival ink was used to stamp the Grid Texture stamp and the butterflies.


To add a lighter touch to the bottles I used a white Distress Crayon.


Shadow around and below the bottles was done with a Distress Crayon and a grey pencil.

From an early Darkroom Door stamp set, Ornate Elements, I used the numbers, stamped onto white cardstock with black Archival ink, cut out and glued in place.

Supplies used:
Darkroom Door Rubber Stamp Sets:  Bottles, Grunge Marks, Wings, Ornate Elements
Darkroom Door Texture Stamp: Grid
Archival Inkpads: Garden Patina, Jet Black
Versamark Inkpad
WOW Embossing Powder Opaque Bright White
Dylusions Paints: Mushy Peas, Fresh Lime, Vibrant Turquoise

Distress Crayons: Picket Fence, Peeled Paint

Pencil
Strathmore Visual Journal

Darkroom Door has lots of beautiful flower stamps.  On this card I used a favourite tulip stamp, also from an early Darkroom Door set, to put in a bottle.


Black Archival ink was used to stamp the bottle and tulip onto watercolor paper. 

Two more tulips were stamped on another piece of watercolor paper to cut out later.


I watercolored the flowers and bottle with Dina Wakley Scribble Sticks by taking pigment from the sticks with a wet brush.


I covered the bottle and tulip with a mask to stamp the Spanish Tiles background with Distress Oxide Pumice Stone.  

I removed the mask from the stamped bottle, and because I used a Misti, I was able to restamp the Spanish Tiles in exactly the same place, to get a subtle impression 'behind' the glass.

The card was finished off with the 2 cut out tulips, and by adding words from the Thank You Sentiment Stamps.

Supplies used:
Darkroom Door Rubber Stamp Sets: Bottles, Full Bloom Vol 1
Darkroom Door Sentiment Stamps: Thank You

Darkroom Door Background Stamp: Spanish Tiles

Archival Inkpad: Jet Black
Distress Oxide Inkpad: Pumice Stone
Dina Wakley Scribble Sticks

On my next card I wanted to create ceramic vases instead of glass bottles.


First I made a colorful background to stamp the bottles on.

I used Distress Oxide inkpads, pressed them onto my Tim Holtz glass media mat, sprayed water and put the watercolor paper in the puddle to pick up the ink. I repeated this a few times, drying the ink inbetween layers.

To stamp the bottles I used Thistle Archival Ink.


After I had cut out the bottles I used stamps from the Foliage set to decorate the bottles.

At the bottom of a landscape folded card I glued a strip of cardstock in a coordinating color and arranged the bottles on the card.

I added a saying from the Thank You stamp set, also stamped with Thistle Archival ink.

A white gelpen was used on the berries.

Supplies used:
Darkroom Door Rubber Stamp Sets: Bottles, Foliage, Thank You
Distress Oxide Inkpads: Carved Pumpkin, Broken China, Seedless Preserves
Archival Inkpad: Thistle
White Gel Pen Signo

I hope I inspired you with my projects.

Thank you for visiting the blog today.

Godelieve

Classic Cars Vol 2 Cards

Darkroom Door - Tuesday, February 05, 2019

Hi from Texas! Connie Mercer here, to share with you some guy cards and a journal page using the new Classic Cars Vol.2 Stamp Set!  This is great for creating cards for the men in your life. They all love cars and especially fast ones. This set also goes great with Classic Cars Vol.1. You will want both sets for sure. They compliment each other so well.
 



Instructions:
1. Start with a grey piece of cardstock for your card front.  
2. Stamp the Grid Background Stamp on the grey cardstock with Distress Oxide Ink (Black Soot).
3. Using a spray bottle of water mist the front of the card. The ink will oxidize and create a distressed look. Dab off extra water. Dry with heat tool.
4. Stamp the car (front side view) stamp on card front.
5. Stamp numbers (from Vintage Office) in left top corner of card with Black ink.
6  Stamp the car (side view) on grey cardstock with black ink.
7. Trim out three sides and gently tear off bottom side.
8. Mat on beige cardstock. Repeat the tearing technique on the beige cardstock also.
9. Adhere to card front.
10. Mat the card front on beige cardstock and then black cardstock.
11. Then add to a folded white card base.
12. Speckle card front with white ink.
13. Stamp sentiment on beige card stock and trim out.
14. Shade with black ink and add to card front.

Supplies used:
Darkroom Door Classic Cars Vol.2 Stamp Set
Darkroom Door Vintage Office Stamp Set
Darkroom Door Grid Background Stamp
Cardsock: Letter It by Ranger
Distress Oxide Ink Pad: Black Soot
Archival Ink: Jet Black 
Dylusions ink Spray: White Linen 


Instructions:
1. Using the Torn Text Background Stamp and grey cardstock, stamp the image on the cardstock with black ink.
2. Using the Large Mesh Stencil apply in random spots, on the card front, using black ink.
3. Do the same thing with the Large stars stencil, random spots on the card front with black ink.
4. Stamp the car on a smaller piece of grey cardstock and apply the Large Mesh stencil in random spots with black ink.
5. Matt the smaller piece on black cardstock.
6..Adhere to the card front.
7. Stamp sentiment with black ink on white cardstock and trim out.
8. Shade with black ink and adhere to card front with dimensional foam squares.
9. Speckle with white ink.
10. Add card front to a folded white card base.
11. Add three rhinestones to each star on the front of the card.

Products used:
Darkroom Door Classic Cars Vol.2 Stamp Set
Darkroom Door Torn Text Background Stamp
Darkroom Door Large Mesh stencil
Darkroom Door Large Starry Night Stencil
Cardstock: Letter It by Ranger
Archival Ink: Jet Black 
Dylusions Ink Spray: White Linen 
Other: black rhinestones


Instructions:
1. Using the Sunshine Background Stamp with grey cardstock, stamp the image using black ink.
2. Adhere a tag to the center of the card front.
3. Stamp the front facing car on white cardstock. Colour in the head lights to match colour of trim on the tag. I used watercolors to achieve this look.
4. Trim out to a rectangle shape.
5. Adhere to card front. Centre the rectangle over the tag.
6. Using the Large Mesh stencil apply random spots on card front.  
7. Add circle sticker (had in my stash).  Mat the card front to beige cardstock and then again on black cardstock.
8. Stamp sentiment on white cardstock with black ink.
9. Trim apart and shade each section with black ink.
10. Add to card front using dimensional foam squares.
11. Speckle with white ink.
12. Adhere to folded white card base.


Products used:
Darkroom Door Classic Cars Vol.2 Stamp Set
Darkroom Door Sunshine Background Stamp
Darkroom Door Large Mesh Stencil
Archiva Ink: Jet Black
Dylusions Ink Spray: White Linen 
Cardsock: Letter It by Ranger


Instructions:
1. Create a background using layers and layers of random colors of acrylic paint. Mine started out as a page that I had cleaned the roller from the Gel-Press on.  It has hints of pink and purple under the green and yellow tones. I dulled that with the black paint.  
2. Add texture to the pages with stencils and modeling paste. The white modeling paste applied over paint kinda of takes on the colors of the paint and I lost the look I was going after.
3. So I re-applied the stencil using acrylic paint.  The paint stayed white and I loved it on the black painted spots on the pages. 
4. The sides of the pages were stamped with Stitched Borders set, giving the look that the pages were stitched with a sewing machine.
5. The center was created by stamping the car images on vintage dictionary paper with black ink. When the journal was closed the center paper tore apart. 
6. Stickers were added and stamped with StazonOn black ink. (The stickers have a shiny surface and I wanted to make sure the text was not going to smear.)
7. Add speckles with black ink over the vintage dictionary paper.
8. Shading was added to the center, where the paper tore.
9. Vintage photo corners were added to the vintage dictionary paper.

Products used:
Darkroom Door Classic Cars Vol.2 Stamp Set
Darkroom Door Classic Cars Vol 1 Stamp Set
Darkroom Door Stitched Borders Stamp Set
Darkroom Door Vintage Office Stamp Set
Darkroom Door Large Mesh Stencil
Archival Ink: Jet Black
StazOn Ink: Black
Paint: DecoArt
stickers

Thanks for stopping by!
Connie